Engine parameters |
Style One |
Style Two |
Style Three |
Style Four |
Style Five |
Model number: |
1104C-44G |
Engine name: |
Electric Power Generation Certified Models |
Mechanical output: |
44-59 kVA (35-47 kWe) |
Electrical output: |
39-54 kWm |
Rated speed: |
1500/1800 rpm |
Prime power: |
50 Hz Typical Electrical Output 43.7 kVA / 60 Hz Typical Electrical Output 39.1 - 42.6 kWe |
Standby power: |
50 Hz Typical Electrical Output 48.2 kVA / 60 Hz Typical Electrical Output 43.1 - 47.1 kWe |
Emissions: |
EU Stage II/U.S. EPA Tier 2 |
Number of cylinders: |
4 inline |
Bore: |
105 mm |
Stroke: |
127 mm |
Displacement: |
4.4 l |
Compression rate: |
19.3:1 |
Aspiration: |
Naturally aspirated |
Combustion system: |
Direct injection |
Rotation from flywheel end: |
Anti-clockwise |
Typical alternator efficiency: |
90% |
Switch: |
Available for some power nodes |
Cooling system: |
Liquid |
Dry weight: |
386 kg |
Dimension: |
Length 1163 mm Width 623 mm Height 951 mm |
Prime Power: |
Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. |
Standby Power: |
Power available at variable load in the event of a main power network failure. No overload is permitted. |
Air inlet system 1: |
Mounted air filter |
Cooling system 1: |
Mounted radiator and piping |
Cooling system 2: |
Thermostatically controlled system with gear driven circulation pump and belt driven pusher fan |
Control system 1: |
12 volt shutdown solenoid energised to run |
Control system 2: |
12 volt starter motor and 12 volt 65 amp alternator with DC output |
Flywheels and flywheel housing 1: |
Flywheel to SAE J620 size 10/11½ |
Flywheels and flywheel housing 2: |
SAE No. 3 flywheel housing |
Fuel system 1: |
Ecoplus fuel filter |
Fuel system 2: |
Rotary type pump |
General 1: |
Glow plug cold start aid |
Oil system 1: |
Spin-on oil filter |
Oil system 2: |
Wet Cast iron sump with filler and dipstick |