| Engine parameters |
Style One |
Style Two |
Style Three |
Style Four |
Style Five |
| Model number: |
1104D-44TG |
| Engine name: |
Electric Power Generation Certified Models |
| Mechanical output: |
56-69 kWm |
| Electrical output: |
60-73 kVA (48-58 kWe) |
| Rated speed: |
1500/1800 rpm |
| Prime power: |
50 Hz Typical Electrical Output 60 kVA / 60 Hz Typical Electrical Output 52 kWe |
| Standby power: |
50 Hz Typical Electrical Output 66 kVA / 60 Hz Typical Electrical Output 56.7-58 kWe |
| Emissions: |
EU Stage IIIA/U.S. EPA Tier 3 |
| Number of cylinders: |
4 inline |
| Bore: |
105 mm |
| Stroke: |
127 mm |
| Displacement: |
4.4 l |
| Compression rate: |
18.2:1-19.3:1 |
| Aspiration: |
Turbocharged |
| Combustion system: |
Direct injection |
| Rotation from flywheel end: |
Anti-clockwise |
| Typical alternator efficiency: |
90% |
| Switch: |
Yes |
| Dimension: |
Length 1238 mm Width 637 mm Height 967 mm Dry Weight 474 kg |
| Prime Power: |
Power available at variable load in lieu of a main power network. Overload of 10% is permitted for one hour in every 12 hours of operation. |
| Standby Power: |
Power available at variable load in the event of a main power network failure. No overload is permitted. |
| Air inlet system 1: |
Mounted air filter and turbocharger |
| Cooling system 1: |
Belt driven pusher fan and guards |
| Cooling system 2: |
Mounted radiator and piping |
| Cooling system 3: |
Water pump |
| Control system 1: |
12 volt starter motor and 12 volt 65 amp alternator with DC output |
| Flywheels and flywheel housing 1: |
High inertia flywheel to SAE J620 size 10/11 |
| Flywheels and flywheel housing 2: |
SAE No. 3 flywheel housing |
| Fuel system 1: |
Fuel filter |
| Fuel system 2: |
Rotary type pump |
| General 1: |
Glow plug start aid |
| Oil system 1: |
Oil filter |
| Oil system 2: |
Wet cast iron sump with filler and dipstick |
