| Engine parameters |
Style One |
Style Two |
Style Three |
Style Four |
Style Five |
| Model number: |
403D-11 |
| Engine name: |
Industrial Open Power Units |
| The maximun power: |
18.1 kW |
| The maximum Torque: |
64.6 Nm @ 2100 rpm |
| Rated speed: |
2800-3000 rpm |
| The minimum power: |
15.1 kW |
| Emissions: |
U.S. EPA Tier 4 Interim equivalent. Less than 19 kW, EU certification not required. |
| Number of cylinders: |
3 inline |
| Cycle: |
4 stroke |
| Bore: |
77 mm |
| Stroke: |
81 mm |
| Displacement: |
1.1 l |
| Compression rate: |
22.7:1 |
| Aspiration: |
Naturally aspirated |
| Combustion system: |
Indirect injection |
| Rotation from flywheel end: |
Anti-clockwise |
| Cooling system: |
Liquid |
| Length×Width×Height: |
777 mm x 438 mm x 729 mm |
| Dry weight: |
129 kg |
| Air inlet system 1: |
Cast iron exhaust manifold - side outlet |
| Air inlet system 2: |
Inlet manifold |
| Air inlet system 3: |
Mounted air cleaner |
| Electrical and electronics 1: |
12 volt alternator |
| Electrical and electronics 2: |
12 volt starter motor |
| Electrical and electronics 3: |
Electronic Shut Off Solenoid (ESOS) |
| Cooling system 1: |
Coolant pump belt driven |
| Cooling system 2: |
Coolant temperature switch |
| Cooling system 3: |
Mounted radiator and fan |
| Flywheels and flywheel housing 1: |
SAE 5 flywheel housing |
| Flywheels and flywheel housing 2: |
SAE flywheel size 165.1 mm (6½ in) |
| Fuel system 1: |
Fuel injection pump |
| Fuel system 2: |
Fuel filter |
| General 1: |
Cast iron engine block |
| General 2: |
Glow plug starting aid |
| Oil system 1: |
Lubricating oil pressure switch |
| Oil system 2: |
Lubricating oil sump |
| Oil system 3: |
Spin on lubricating oil filter |
